JFK deep groove ball bearings
JFK ball bearings
- High speed
- Combined loads
- Lifetime lubricated
Deep groove ball bearings are bearing elements for rotating shafts designed to support radial and axial loads in both directions, even at high speeds. Their deep-groove design and optimized contact between raceways and balls make them the most versatile and widely used rolling bearings in industry, providing a reliable solution for the vast majority of applications with a rotating inner ring.
JFK Group offers single-row and double-row deep groove ball bearings in a complete range of sizes, designs, and sealing materials. Shielded or sealed versions are lifetime lubricated and maintenance-free. Available as open bearings, with steel sheet shields (Z/ZZ), or with single- or double-lip contact seals (RS/2RS), with cages made of pressed steel, polyamide, or solid brass depending on the series and size.
Compared with other types of rolling bearings, deep groove ball bearings are the ideal choice when high speeds, quiet operation, and low friction are required for moderate loads. Double-row deep groove ball bearings offer the same versatility with increased load capacity, while requiring less axial space than a pair of separate bearings.
Versions
How to choose the right deep groove ball bearing
The choice between single-row and double-row versions mainly depends on the required load capacity and the available axial space. Both versions support radial and axial loads in both directions and are available with the same sealing options.
Single-row deep groove ball bearings
The most widely used and versatile version. Simple, non-separable design, suitable for high speeds with minimal maintenance. Available in numerous variants: tapered bore, stainless steel, high-temperature, inch-size, thin-section, miniature, flanged, and with a snap-ring groove. Cages are available in pressed steel, reinforced polyamide 6.6, or solid brass. Versatile · High speed · Wide range of models
Double-row deep groove ball bearings
Equivalent in design to two single-row deep groove ball bearings, with the balls contained in a single cage made of glass-fibre-reinforced polyamide. They offer the same ability to support radial and axial loads in both directions at high speeds, with increased load capacity in a reduced axial space. Available in open, shielded (ZZ), or contact-sealed (RS/2RS) versions. Double-row · High load capacity · Reduced axial space
Performances
Design and performance features
The deep-groove design and optimized contact between raceways and balls ensure reliable performance across a wide range of operating conditions.
Load
High radial and axial load capacity They support radial and axial loads in both directions thanks to the deep grooves. For JFK Group, the minimum load must be greater than 2% of the dynamic load rating.
Speed
Ideal for high rotational speeds Among the rolling bearings best suited for high speeds, thanks to their low internal friction and simple design. Versions with polyamide 6.6 cages can operate at temperatures up to +120°C.
Lubrication
Lifetime lubricated in sealed versions Versions with shields (Z/ZZ) or seals (RS/2RS) are lifetime lubricated and maintenance-free. They must not be washed or heated above 80°C.
Seal
Choice of shields or seals Steel sheet shields (Z/ZZ) forming a labyrinth with the inner ring. Metal-reinforced NBR contact seals (RS/2RS). Sealed versions are suitable for temperatures from –40°C to +100°C, with peaks up to +120°C.
Internal clearance
Standard CN clearance as standard Products supplied with normal internal clearance (CN) as standard. Reduced clearance C2 or increased clearance C3/C4 available on request. Normal standard tolerance class (PN), with P6 and P5 available on request for larger sizes.
Cages
A variety of options to suit every need Pressed steel sheet (standard), reinforced polyamide 6.6 (TN, up to +120°C), solid brass centered on the balls (M), centered on the outer ring (MA), or in one-piece design (MAP).
Mounting
Installation of deep groove ball bearings
Deep groove ball bearings are mounted with an interference fit on the shaft and with clearance in the housing. For tapered-bore versions, installation on cylindrical shafts is possible using adapter or withdrawal sleeves. Shielded or sealed versions must not be washed or heated above 80°C.
Installation Mounting
- Direct press fit on the shaftUsing a mounting tool that applies the force to the inner ring. Never apply mounting force through the rolling elements.
- Heating the inner ringFor larger sizes, heat the deep groove ball bearing to a maximum of +80°C to facilitate installation on the shaft.
- Installation with adapter sleeve (tapered bore)For bearings with a tapered bore: quick installation on cylindrical shafts without additional axial locking devices.
Technical data
- Load
- High radial and axial load capacity
- Speed
- Ideal for high rotational speeds
- Lubrication
- Lifetime lubricated in sealed versions
- Seal
- Choice of shields or seals
- Internal clearance
- Standard CN clearance as standard
- Cages
- A variety of options to suit every need
Applications
Applications
Components and application support for every industrial environment.
Industrial automation
Continuous high-speed operation, low-noise requirements, and minimal maintenance. Versions with 2RS seals provide reliable sealing and lifetime lubrication without the need for maintenance.
Automotive / Motorcycles, Trucks & Buses
Mechanisms subject to vibration, varying temperatures, and intermittent load cycles. Deep groove ball bearings cover the vast majority of support points in transmission and suspension systems.
Transmissions and axles
Combined radial and axial loads in confined spaces. The versatility of deep groove ball bearings makes them the standard choice for gearboxes, transmissions, and industrial drive systems.
Construction Equipment
High loads, vibration, and severe environmental conditions. Versions with solid brass cages and reinforced seals ensure reliable performance even in the most demanding applications.
Agriculture
Dirt, moisture, and minimal maintenance requirements. Sealed, lifetime-lubricated versions eliminate the need for relubrication in hard-to-access locations.Documents data
Contacts
Request information about this product
Complete the form for technical information, quotations or trial samples.
Related products
Please also consider these alternatives: When the axial load exceeds the radial load or high axial stiffness is required, angular contact ball bearings are the preferred alternative to deep groove ball bearings. When misalignment occurs between the housing and shaft, self-aligning ball bearings offer the same versatility with tolerance for alignment errors. When the load is predominantly or exclusively axial, thrust ball bearings are the dedicated choice.
JFK angular contact ball bearings
Angular contact ball bearings are designed to support axial loads acting in one direction and are generally mounted in opposition to a second bearing.…
JFK stainless steel bearings
Stainless steel bearings are rolling bearings made from high-performance stainless steel, resistant to oxidation, moisture, and chemicals, designed to operate in harsh environments and…