JFK plain bushings
JFK linear bushings
- Unhardened shafts
- Linear and rotational movements
- PTFE and sintered bronze
JFK plain bushings, also known as linear bushings or linear plain bearings, are sliding bushings consisting of an anodized aluminum alloy body containing two bushings (PTC..SL or PTC..RK Series) made from a steel strip protected by a few-micron-thick copper or tin coating, onto which a porous bronze layer with PTFE or PPS is sintered.
PTFE is a plastic material with an extremely low coefficient of friction, while PPS is a high-performance material with a cross-linked structure that allows for higher applicable specific pressure. Unlike ball recirculating bushings, plain bushings offer two key advantages: they can operate on unhardened shafts and also allow rotation around the shaft axis in addition to linear motion.
Both the heavy-duty BA and BAO Series and the light-duty BAL Series are supplied as standard with two wiper rings that continuously keep the shaft clean, extending the service life of the internal bushings.
Versions
Three series: how to choose the right plain bushing
The choice between the heavy-duty and light-duty series depends on the load and the available housing. The BA Series is dimensionally interchangeable with KB ball recirculating bushings; BAO with KB_O; and BAL with KH.
BA Series - Heavy-duty, closed
Heavy-duty series · Closed · Dimensionally interchangeable with KBAnodized aluminum alloy body, PTC steel bushings with PTFE/bronze. Dimensionally interchangeable with the KB Series ball recirculating bushings. Two standard wiper rings keep the shaft clean. Available with one seal (BA..U), two seals (BA..UU), or without seals (BA..).
BAO Series - Heavy-duty, open
Heavy-duty series · Open · Dimensionally interchangeable with KB_OSame features as the BA Series, with an open design for housings with a longitudinal opening. Dimensionally interchangeable with the KB_O Series ball recirculating bushings. Two standard wiper rings.
BAL Series - Light-duty, closed
Light-duty · Closed · Interchangeable with KHLight-duty closed series for applications with lower loads. Dimensionally interchangeable with the KH Series ball recirculating bushings. Two standard wiper rings. Reduced space requirements compared to the heavy-duty series.
Performances
Design and performance features
Anodized aluminum body with PTFE/bronze bushings and integrated wiper rings for long service life on untreated shafts.
Unhardened · Reduction in production costs
The main advantage over ball recirculating bushings: they operate on unhardened shafts, eliminating the need for shaft heat treatment and its associated costs.
Combined linear and rotary
Unlike ball recirculating bushings, they also allow rotation around the shaft axis in addition to linear motion, making them suitable for applications with combined movements.
PTFE or PPS on sintered bronze
PTFE provides an extremely low coefficient of friction. PPS allows for higher applicable specific pressure.
Two standard wiper rings
The two integrated wiper rings continuously keep the shaft clean, extending the service life of the internal bushings even in environments with dust or contaminants.
Temperature
The same operating temperature range as ball recirculating bushings, suitable for most standard industrial applications.
One, two or none seals
Available with one seal (suffix U), two seals (UU), or without seals to meet the different protection requirements of the application.
Mounting
Plain bushing installation
Unlike ball recirculating bushings, the shaft does not require hardening, but it must still meet the appropriate dimensional tolerance and surface roughness requirements to ensure proper fit with the PTFE/bronze bushings and effective sealing by the wiper rings.
Mounting methods
- Checking shaft tolerance and surface roughness
- Bushing and wiper ring installationInstall the bushing onto the shaft, ensuring that the wiper rings remain correctly positioned at both ends to keep the shaft continuously clean during operation and extend the service life of the internal bushings.
Technical data
- Shaft hardening
- Not required (unhardened shaft)
Applications
Applications
Components and application support for every industrial environment.
Applications with unhardened shafts
When shaft heat treatment is not economically viable or technically feasible. Plain bushings provide good performance on standard machined shafts.
Combined linear and rotational movements
Machines with axes requiring both linear and rotational motion. Ball bushings do not allow this combination.Industrial automation
Systems with linear motion and reduced maintenance requirements. Wiper rings extend service life in environments with dust and contaminants.
Agricultural and gardening machinery
Applications with moderate loads in demanding environments. The robust anodized aluminum body and corrosion resistance are specific advantages.Technical documents
Contacts
Request information about this product
Complete the form for technical information, quotations or trial samples.
Related products
JFK ball recirculating bushings
JFK ball recirculating bushings, also known as ball recirculating bearings, consist of a cylindrical steel outer ring with a special heat treatment, a ball-retaining cage (made of stamped steel or polyamide), and…
DJA MOND dry self-lubricating bushings
DJA MOND dry-running self-lubricating bushings are solid metal sliding elements featuring PTFE and/or graphite-based solid lubricant inserts. Depending on the selected version, they are available as PTFE or graphite dry-running bushings. During…